BinarCode / laravel-mailator by binaryk

Laravel Mailator provides a featherweight system for configure email scheduler and email templates based on application events.

Installation

You can install the package via composer:

composer require binarcode/laravel-mailator

Publish

Publish migrations: a vendor:publish --tag=mailator-migrations

Publish config: a vendor:publish --tag=mailator-config

Usage

It has mainly 2 directions of usage:

1. Schedule emails sending (or actions triggering)

2. Email Templates & Placeholders

Scheduler

To set up a mail to be sent after or before an event, you can do this by using the Scheduler facade.

Here is an example of how to send the invoice reminder email 3 days before the $invoice->due_date:

use Binarcode\LaravelMailator\Tests\Fixtures\InvoiceReminderMailable;
use Binarcode\LaravelMailator\Tests\Fixtures\SerializedConditionCondition;

Binarcode\LaravelMailator\Scheduler::init('Invoice reminder.')
    ->mailable(new InvoiceReminderMailable($invoice))
    ->recipients('foo@binarcode.com', 'baz@binarcode.com')
    ->constraint(new SerializedConditionCondition($invoice))
    ->days(3)
    ->before($invoice->due_date)
    ->save();

Let's explain what each line means.

Mailable

This should be an instance of laravel Mailable.

Recipients

This should be a list or valid emails where the email will be sent.

It could be an array of emails as well.

Weeks

This should be a number of weeks the email should be delayed.

Days

This should be a number of days the email should be delayed.

Hours

Instead of days() you can use hours() as well.

Minutes

If your scheduler run by minute, you can also use minutes() to delay the email.

Before

The before constraint accept a CarbonInterface and indicates from when scheduler should start run the mail or action. For instance:

    ->days(1)
    ->before(Carbon::make('2021-02-06'))

says, send this email 1 day before 02 June 2021, so basically the email will be scheduled for 01 June 2021.

After

The after constraint accept a CarbonInterface as well. The difference, is that it inform scheduler to send it after the specified timestamp. Say we want to send a survey email 1 week after the order is placed:

    ->weeks(1)
    ->after($order->created_at)

Constraint

The contraint() method accept an instance of Binarcode\LaravelMailator\Constraints\SendScheduleConstraint. Each constraint will be called when the scheduler will try to send the email. If all constraints return true, the email will be sent.

The constraint() method could be called many times, and each constraint will be stored.

Since each constraint will be serialized, it's very indicated to use Illuminate\Queue\SerializesModels trait, so the serialized models will be loaded properly, and the data stored in your storage system will be much less.

Let's assume we have this BeforeInvoiceExpiresConstraint constraint:

class BeforeInvoiceExpiresConstraint implements SendScheduleConstraint
{
    public function canSend(MailatorSchedule $mailatorSchedule, Collection $log): bool
    {
        // your conditions
        return true;
    }
}

Constraintable

Instead of defining the constraint from the mail definition, sometimes it could be more readable if you define it directly into the mailable class:

use Binarcode\LaravelMailator\Constraints\Constraintable;

class InvoiceReminderMailable extends Mailable implements Constraintable
{
    public function constraints(): array
    {
        return [
            new DynamicContraint
        ];
    }
}

Action

Using Scheduler you can even define your custom action:

$scheduler = Scheduler::init('Invoice reminder.')
    ->days(1)
    ->before(now()->addWeek())
    ->actionClass(CustomAction::class)
    ->save();

The CustomAction should implement the Binarcode\LaravelMailator\Actions\Action class.

Target

You can link the scheduler with any entity like this:

        Scheduler::init('Invoice reminder.')
            ->mailable(new InvoiceReminderMailable())
            ->days(1)
            ->target($invoice)
            ->save();

and then in the Invoice model you can get all emails related to it:

// app/Models/Invoice.php
public function schedulers() 
{
    return $this->morphMany(Binarcode\LaravelMailator\Models\MailatorSchedule::class, 'targetable');
}
...

Mailator provides the Binarcode\LaravelMailator\Models\Concerns\HasMailatorSchedulers trait you can put in your Invoice model, so the relations will be loaded.

Daily

By default, scheduler run the action, or send the email only once. You can change that, and use a daily reminder till the constraint returns a truth condition:

use Binarcode\LaravelMailator\Scheduler;

// 2021-20-06 - 20 June 2021
$expirationDate = $invoice->expire_at;

Scheduler::init('Invoice reminder')
->mailable(new InvoiceReminderMailable())
->daily()
->weeks(1)
->before($expirationDate)

This scheduler will send the InvoiceReminderMailable email daily starting with 13 June 2021 (one week before the expiration date).

How to stop the email sending if the invoice was paid meanwhile? Simply adding a constraint that will do not send it:

->constraint(new InvoicePaidConstraint($invoice))

and the constraint handle method could be something like this:

class InvoicePaidConstraint implements SendScheduleConstraint
{
    use SerializesModels;
    
    public function __construct(
        private Invoice $invoice
    ) { }

    public function canSend(MailatorSchedule $schedule, Collection $logs): bool
    {
        return is_null($this->invoice->paid_at);
    }
}

Stop conditions

There are few ways email stop to be sent.

The first condition, is that if for some reason sending email fails 3 times, the MailatorSchedule will be marked as completed_at. Number of times could be configured in the config file mailator.scheduler.mark_complete_after_fails_count.

Any successfully sent mail, that should be sent only once, will be marked as completed_at.

Stopable

You can configure your scheduler to be marked as completed_at if in the you custom constraint returns a falsy condition. Back to our InvoiceReminderMailable, say the invoice expires on 20 June, we send the first reminder on 13 June, then the second reminder on 14 June, if the client pay the invoice on 14 June the InvoicePaidConstraint will return a falsy value, so there is no reason to try to send the invoice reminder on 15 June again. So the system could mark this scheduler as completed_at.

To do so, you can use the stopable() method.

Unique

You can configure your scheduler to store a unique relationship with the target class for mailable by specifying:

->unique()

ie:

Scheduler::init()
    ->mailable(new InvoiceReminderMailable())
    ->target($user)
    ->unique()
    ->save();
    
Scheduler::init()
    ->mailable(new InvoiceReminderMailable())
    ->target($user)
    ->unique()
    ->save();

This will store a single scheduler for the $user.

Events

Mailator has few events you can use.

If your mailable class extends the Binarcode\LaravelMailator\Contracts\Beforable, you will be able to inject the before method, that will be called right before the sending the email.

If your mailable class extends the Binarcode\LaravelMailator\Contracts\Afterable, you will be able to inject the after method, that will be called right after the mail has being sent.

And latest, after each mail has being sent, mailator will fire the Binarcode\LaravelMailator\Events\ScheduleMailSentEvent event, so you can listen for it.

Run

Now you have to run a scheduler command in your Kernel, and call:

Binarcode\LaravelMailator\Scheduler::run();

Package provides the Binarcode\LaravelMailator\Console\MailatorSchedulerCommand command you can put in your Console Kernel:

$schedule->command(MailatorSchedulerCommand::class)->everyThirtyMinutes();

Templating

To create an email template:

$template = Binarcode\LaravelMailator\Models\MailTemplate::create([
    'name' => 'Welcome Email.',
    'from_email' => 'from@bar.com',
    'from_name' => 'From Bar',
    'subject' => 'Welcome to Mailator.',
    'html' => '<h1>Welcome to the party!</h1>',
]);

Adding some placeholders with description to this template:

$template->placeholders()->create(
    [
        'name' => '::name::',
        'description' => 'Name',
    ],
);

To use the template, you simply have to add the WithMailTemplate trait to your mailable.

This will enforce you to implement the getReplacers method, this should return an array of replacers to your template. The array may contain instances of Binarcode\LaravelMailator\Replacers\Replacer or even Closure instances.

Mailator shipes with a builtin replacer ModelAttributesReplacer, it will automaticaly replace attributes from the model you provide to placeholders.

The last step is how to say to your mailable what template to use. This could be done into the build method as shown bellow:

class WelcomeMailatorMailable extends Mailable
{
    use Binarcode\LaravelMailator\Support\WithMailTemplate;
    
    private Model $user;
    
    public function __construct(Model $user)
    {
        $this->user = $user;
    }
    
    public function build()
    {
        return $this->template(MailTemplate::firstWhere('name', 'Welcome Email.'));
    }

    public function getReplacers(): array
    {
        return [
            Binarcode\LaravelMailator\Replacers\ModelAttributesReplacer::makeWithModel($this->user),

            function($html) {
                //
            }       
        ];
    }
}

Testing

composer test

Changelog

Please see CHANGELOG for more information what has changed recently.

Contributing

Please see CONTRIBUTING for details.

Security

If you discover any security related issues, please email eduard.lupacescu@binarcode.com or message me on twitter instead of using the issue tracker.

Credits

• Eduard Lupacescu
• All Contributors

License

The MIT License (MIT). Please see License File for more information.